1. Welcome to the eTeknix Forums Guest. Please register or login and remember to read the forum guidelines to make your stay as pleasant as can be.

Pandoras Purple Box (ooh, er)

Discussion in 'Project Logs' started by davido_labido, Feb 20, 2015.

  1. davido_labido

    davido_labido Active Member

    Joined:
    Jul 17, 2014
    Messages:
    60
    Likes Received:
    13
    So, im back! Ive been far too busy to be around lately, but I have just started this little project, so thought id share it with you all!

    First things first, I would like to thank
    [​IMG][​IMG]
    [​IMG][​IMG]
    [​IMG][​IMG]

    There may be more sponsors to come soon, but I will add them if/when they arrive.


    The Idea

    Well, me and a rep from BitFenix UK have been chatting about a few little builds and ideas when we decided it would be nice to see a Pandora get some loving. I didn't really know what I was going to do with it, but I liked the looks of the pictures id seen of them so I thought id give one a go.

    Of course I then contacted my awesome HyperX guy to see if he wanted in, and well, put it this way, 5 days later, I have the case, RAM and SSDs ready for the build!

    some product porn

    So HyperX asked me what I wanted for this build, I wasn't entirely sure what I was going to do with this one, so I just opted for 2 small ssds (120gb each) 16gb of ram and some other bits that will be arriving soon from them!

    Here is the first parcel I received from them:

    [​IMG]

    [​IMG]

    [​IMG]

    I really am happy that HyperX are on-board again, thanks Krystian ... I have plans for these products, so keep an eye out!

    Bitfenix also sent me some rather nice goodies,

    From them, I have a case, PSU, Cables and LEDS... im still waiting on the LEDS but the rest arrived today!

    a lovely looking case:

    [​IMG]

    and the PSU

    [​IMG]

    I will show you the cables a little later on, I again have a few things planned for them, as you know, I dont usually use aftermarket extensions, but I thought id make the exception this time!

    So... On to the modding....
     
    Last edited: Feb 21, 2015
  2. davido_labido

    davido_labido Active Member

    Joined:
    Jul 17, 2014
    Messages:
    60
    Likes Received:
    13
    So, lets start on this BitFenix Pandora then shall we!?


    I didnt have any real ideas for this until i got the case. I have noticed it really is going to be a tight squeeze getting all the cables i want it for the build, never mind the watercooling as well!

    so, time to get to grips with it...

    First things first, i started to strip the case to see what i could put where, radiators look like they are gonna be a tight fit....

    [​IMG]

    then, took a little bit more off

    [​IMG]

    until i was left with this....

    [​IMG]

    Hmmmmm ok, thats all very well and good... but i wonder... that looks rather rectangular to me, maybe i could invert the case, have it so the GPUs are at the top!!?!

    so, i got the drill out.... drilled out the rivets

    [​IMG]

    then, i started to put it back together....

    I knew i was going to have some problems as obviously each side of the case isnt the same but it did slot together quite well

    [​IMG]

    a few minutes later, id re done the rivets

    [​IMG]

    then i started to see what panels still fit.

    [​IMG]

    the top is fine, the back is too high, the front doesnt fit at all and neither do the sides properly.

    [​IMG]

    The sides are easily sorted (if i can get BitFenix to send me another one without a window (its the window that doesnt look correct)) then the other panels will mod i think. i cant see there being too much of a problem.

    Its as much as i can get done for now, ive got a load of stuff to do with this build, so need to crack on!
     
  3. davido_labido

    davido_labido Active Member

    Joined:
    Jul 17, 2014
    Messages:
    60
    Likes Received:
    13
    So, a little bit of an update now, and let you know whats happening then a bigger one should be coming later tonight if i can get a few hours off from working!...

    So last week whilst on the train i had these in my bag:

    [​IMG]

    as you all are probably aware, i actually sleeve a lot of cables... seriously, loads and nothing compares to a custom made set, however, wit BitFenix as a sponsor, i thought i would save some time and effort and try out their "Alchemy" range.

    The crimps on these cables have been done well, I like how they are not just one set colour and the lengths are plenty for the majority of the builds, im also really liking the white connectors, however they are just not 100% right for me .. The colours are not in the order i want, the lengths are a little too long and i want to put a nice curve in them to make sure that they look as pretty as possible! so i pulled out all of the wires...

    [​IMG]

    I did get some strange looks whilst on the train, but then again i had made a little bit of a mess and i was taking up a whole table (dont worry, the train wasnt too busy)...

    [​IMG]

    A short while later i ended up with this :

    [​IMG]

    Now, im going to have to see what hardware is going into this build before I do too much more with them as i am going to cut the cables down a little and re crimp them, but what do you guys think about these 2 coloured sets?. Im actually really impressed with them, it saves a lot of hassle and look pretty too!


    When I got home from my days away from work, i had a box... now, I wasnt going to even bother posting this until later either, but I really am impressed. These are great, and although usually I wouldnt really bother with a product until im ready to mod it, im already using these!!!

    The inner box is rather nice...

    [​IMG]

    Hmmmm, these are a little bit too black for this build... I guess im going to have to just keep them as my main headset.... or mod them ;)

    [​IMG]

    And last but not least... I didnt believe the hype(rX? no... just me? fine...) surrounding these headsets tbh and im no audiophile, but i really am loving these. Thanks HyperX!!!!

    [​IMG]


    So, I realise this update is more showing what i have rather than anything actually happening, but i wanted to share this with you also....

    I HAVE A NEW SPONSOR (well, maybe 2)!!!!!!


    Im not going to say who yet... but lets just say... Pandora's box will be getting wet soon. (steady on!) and the 2 sponsors compliment each other perfectly.

    Can ya guess who they might be?
     
  4. davido_labido

    davido_labido Active Member

    Joined:
    Jul 17, 2014
    Messages:
    60
    Likes Received:
    13
    Hi guys, a little bit of news and another small update!

    So, a massive thanks to BitFenixUK again, I asked if I could get a couple of spare panels to play with so that i didnt have to start cutting up the originals to get them to fit, and they sent me another Pandora!!! so now all bar 1 panel fits perfectly!

    What else have I been doing? Well, im currently waiting on finding out if a sponsor is willing to help me with a GPU/mobo... if so then this build will soon be speeding up, if not then it will have to slow down a little whilst I sneak the money out of the joint savings account! SHHHH!

    so... SSDs.

    [​IMG]

    First of all, I again, broke these silly little warranty stickers that they keep putting on the SSDs that HyperX so kindly send me. They know they wont last long! ;)

    [​IMG]

    hmmmm, internals.

    [​IMG]

    pulled off the "x" and made sure there was no glue left on the back of it.

    [​IMG]

    put them in my state of the art sprayng booth... its definitly not a box! honest guv

    [​IMG]

    Gave them a good couple of coats of primer

    [​IMG]

    a coat of purple...

    and thats as far as i can go with it for now as its still drying! I want to give them at least 24hrs before i start putting them back togther, probably more like 48. And also need to grab some more white paint next time im in town to finish off the cases. This gives you a little insight into what they will look like though!

    at the same time I also did the top mesh for the BitFenix Pandora.

    [​IMG]

    Again, whipped it all apart, the middle bit is a dust filter, i wont be using that.

    [​IMG]

    Primer

    [​IMG]

    PURPLE!!! (to the untrained eye, I can understand that you might thing that is a dominos pizza box im using to spray on... i assure you, it might not be.)

    [​IMG]

    hmmmm, nice coating.

    [​IMG]

    [​IMG]

    Thanks for looking guys, apologies that these pictures werent great either, I was doing all of this whilst trying to work and couldnt spend the time i wanted on taking the pictures. I will however do some nice ones later when I put the SSDs back together and spray the other top bit of the Pandora.
     
  5. davido_labido

    davido_labido Active Member

    Joined:
    Jul 17, 2014
    Messages:
    60
    Likes Received:
    13
    so a little bit of an update here! sorry its taking a little while, I am rather ill at the moment with face ache (no idea what the problem is, something to do with my teeth crushing a cluster of nerves... its painful, as in, it hurts the whole of my left side of my face)

    So without further to do... I pulled the plastic bits from the case and started to spray them white, this will go with the purple mesh you can see above!

    [​IMG]

    The buttons, i actually used plasti dip as i wasnt 100% sure that they would work with the extra coating of paint as they are quite tight.

    This is what it looks like once it has all been painted.

    [​IMG]

    [​IMG]

    The SSDS have been put back together, but not 100% finished yet, im not happy with them entirely. I want to paint the logo back on and the left one has a couple of speckles of paint on (its hard to see with the naked eye, but the camera picks it up)

    [​IMG]

    Also, i have now made the whole case fit together again (thanks to BitFenixUK for sending me a second Pandora to take apart for spares).

    so this was the main problem i was having with the front panel (look at my amazing paint skills)

    [​IMG]

    Basically none of the holes fit anywhere where the lug holes were in the wrong places, so i re drilled and moved them about a bit!

    [​IMG]

    Now the front panel fits perfectly!!!

    [​IMG]

    [​IMG]

    and here is a little before and after!

    [​IMG]


    I would also like to announce my new sponsors!

    ASUS will be supplying my motherboard so thank you guys!
    ekwb will be supplying my loop, it will be awesome to work with these guys
    Mayhems will be filling it as per usual, so its awesome to have them back on board!

    I will be sorting out the logos and such as the parts arrive!
     
  6. davido_labido

    davido_labido Active Member

    Joined:
    Jul 17, 2014
    Messages:
    60
    Likes Received:
    13
    well, I would like to say a massive thank you to my latest sponsor:

    [​IMG]

    These guys have stepped up rather quickly for me, within 24 hours of confirming which motherboard I wanted, a UPS van turned up with it so I really cant fault them!

    Lets see what they sent me:

    [​IMG]

    Hmmmm, i'm loving the armour

    [​IMG]

    wasn't this a BBC show? Im pretty sure I liked that too!

    [​IMG]

    hmmm, maybe this should be "pandora edition"

    [​IMG]

    Lets get HyperX in on this mobo action!!

    [​IMG]

    hmmmm, I love this picture <3... reminds me of that ballad from the classical music group "Spice Girls - When 2 become 1" ... I heart you sponsors!

    [​IMG]

    Unfortunately ASUS were unable to budget for a GPU for me at this moment in time, which is understandable! They are sponsoring some amazing builds at the moment from the likes of B N3GATIVE and montymole so I was more than happy to put my hand in my pocket for this!

    [​IMG]

    Its my first AMD card.... Ever!

    [​IMG]

    I really like this backplate too, ok, if i can get it to fit with the waterblock that should be on its way soon, then it certainly wont be staying black!

    [​IMG]

    I will say a huge thank you to OCUK though as per usual who always step up and help me. Im rather thankful as the missus doesnt give me as much of a hard time and they really do go above and beyond in helping me. The amount of time the guys at OCUK have for me is amazing - Thanks Gents!

    So, the next update will most certainly be spraying the motherboard armour and then having a look at how the cables are going to fit into this case. Then, its just waiting for my ekwb shipment and some colour matching from Mayhems coolant and we can really start on the build :D
     
  7. SimpleCookie

    SimpleCookie Well-Known Member

    Joined:
    Nov 4, 2014
    Messages:
    162
    Likes Received:
    14
    Location:
    Sweden
    Show PC Specs
    CPU:
    Intel Core i5 4690K 3,5 GHz, 6MB, previously CPU Core i5 2500K
    Motherboard:
    MSI Z97S SLI-Plus, previously MSI P67A-GD65, P67, ATX B3
    Memory (RAM):
    Corsair 2x4GB DDR3 1600MHz/VENG
    Storage:
    Samsung SSD EVO 850-Series 500GB and HD1TB WD SATA-600 64MB, Caviar Black
    Graphics Card(s):
    MSI GeForce GTX 760 2GB TwinFrozr, previously EVGA GeForce GTX 570 SC
    Power Supply (PSU):
    BeQuiet 700 W, previously XFX Core Edition 650W 80+ Bronze (RMA'd)
    Case:
    Kab Fractal Design Define R3/BLACk
    Monitor(s):
    ROG SWIFT PG278Q
    Operating System(s):
    Windows 8.1 Professional N 64bit
    Internet Connection:
    100/100 Fiber
    Oh man, it looks great, I'm so jealous!
     
  8. funkydunk

    funkydunk Member

    Joined:
    Feb 14, 2015
    Messages:
    51
    Likes Received:
    3
    Location:
    UK
    Nice.. looks a decent case too.. has living room appeal whilst still showing some flair.
     
  9. davido_labido

    davido_labido Active Member

    Joined:
    Jul 17, 2014
    Messages:
    60
    Likes Received:
    13
    Thanks buddy!

    Yeah, I do like the case, it obviously doesnt work very well for a watercooled build (thats why I chose this case for it lol), but if you were just using it as a mini living room PC or a HTPC or something it would be perfect!


    So, obviously the armour wasnt going to stay that colour for long!!! so here we go, into my state of the art spray booth it goes!!!

    getting it optimally primed

    [​IMG]

    and then sprayed

    [​IMG]

    not forgetting the PCI-E covers (i set them into the cardboard so that the actual backs stayed plastic... i dont want flaking paint in my pci-e slots!)

    [​IMG]

    and some shots of the (almost) finished product:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    I am going to introduce some more purple to the armour.... I have an idea and the parts are on order for said idea to work :D

    however, we are seeing some problems cropping up in this build... some major, some not so...

    for example:

    The biggest issue I have is the GPU is wider than the case, I did actually think this would happen, so it wasnt a total suprise, but its not going to be an easy problem to fix. I do have some bits on order that will help solve the issue though. I have 3 ideas so far that will hopefully make sure that everything will still go into the Pandora :D

    [​IMG]


    The PSU wont fit at the top properly. This is due to the top of the case, so i will have to get the dremel onto that and teach it a lesson.

    [​IMG]

    and the last little niggle is that the 24 pin slot is not in line with the holes, so I will have to get the dremel out, cut the hole then make a motherboard tray cover as well, which I have started to measure up :D

    [​IMG]

    Using yet more really expensive equipment (its totally NOT a bit of cardboard box from OCUK!!!) I started to see where i needed to cover and what i needed to cut out.

    [​IMG]

    This will be the rough shape of the cover. The good thing about this is i should be able to move it in slightly so that i have somewhere to route the cables also, but we will see how that works when i have made it.

    [​IMG]

    I want to try and grab some matt white acrylic to make this out of... PARVUM?! where are you guys!!?! :p
     
    Last edited: Feb 21, 2015
  10. Sharif

    Sharif Well-Known Member

    Joined:
    Oct 24, 2014
    Messages:
    454
    Likes Received:
    32
    Location:
    SA
    Show PC Specs
    CPU:
    Phenom II X4 955
    Motherboard:
    M4A785TD-V EVO
    Memory (RAM):
    Kingston 8 gig
    Storage:
    2 x HDD (total 1.5TB)
    Graphics Card(s):
    GTX 970 Strix
    Power Supply (PSU):
    Corsair CX600M
    Case:
    NZXT H440
    Monitor(s):
    Dell U2412m + LG IPS something something
    Operating System(s):
    W8.1 pro
    Internet Connection:
    40mbs~
    AWESOME!!

    I might look into that case,when pandora 2 comes out.
     
  11. funkydunk

    funkydunk Member

    Joined:
    Feb 14, 2015
    Messages:
    51
    Likes Received:
    3
    Location:
    UK
    Nice.. like the colour scheme. What you going to do about the graphics card?
     
  12. davido_labido

    davido_labido Active Member

    Joined:
    Jul 17, 2014
    Messages:
    60
    Likes Received:
    13
    they are quite nice cases really :D not something id usually go for but as you can see from the eteknix.com review, it really is a nice bit of kit

    http://www.eteknix.com/bitfenix-pandora-micro-atx-chassis-review/

    I have a few little options, i will probably put it at 45 or 90 degrees and use a riser cable to connect it to the motherboard. I need to see if the EK block makes it bigger or smaller first though lol, Im hoping it might go slightly smaller as it wont need the heat pipe...

    ....................


    So a little bit more work has been done!

    This is the front panel to the Pandora.

    [​IMG]

    as you can see, its rather black and also has this:

    [​IMG]

    This allows a little LCD screen to shine through the smoked acrylic.

    [​IMG]

    This means without masking the square I cant really just paint it. So, I had a slightly different idea and did this...

    [​IMG]

    not very neat i know... but with a file and a bit of emery cloth I managed to get this:

    [​IMG]

    not bad... not bad.

    The front panel is still rather black though..... So, i took it apart (its 2 panels screwed together) and put them into my hi tech booth.

    [​IMG]

    give them a couple of coats of primer

    [​IMG]

    then sprayed the almost hidden one (you can see it a little bit from the front) white

    [​IMG]

    and the main panel purple

    [​IMG]


    I put the panels back together (the front panel is made up of 2 seperate ones, and it just didn't look right at all, because id cut the panel for the screen, it just looked like it was too far away from the front of the case, so i came up with the solution.

    I had a little scrap of clear acrylic kicking about.

    [​IMG]

    marked the hole onto it and filed it down

    [​IMG]

    Then inlayed it into the front of the case panel.

    [​IMG]

    its not perfect, but i was doing it at 22:30 on a sunday night in the kitchen!!! and all i used were these tools :D

    [​IMG]

    So, whats it look like now?

    Panels before and after (its awesome having a spare case, it means I can do shots like these so much easier!!!)

    [​IMG]

    panels fitted

    [​IMG]

    a really nice shot to show how the case has changed overall, you can really see the difference between my inverted case and the standard one

    [​IMG]

    and one with the case panels on. I need to get these painted/coated next. Ideally though I need to see what im doing with the hardware first! Hopefully then I can progress!

    [​IMG]

    Thanks for reading!
     
  13. Sharif

    Sharif Well-Known Member

    Joined:
    Oct 24, 2014
    Messages:
    454
    Likes Received:
    32
    Location:
    SA
    Show PC Specs
    CPU:
    Phenom II X4 955
    Motherboard:
    M4A785TD-V EVO
    Memory (RAM):
    Kingston 8 gig
    Storage:
    2 x HDD (total 1.5TB)
    Graphics Card(s):
    GTX 970 Strix
    Power Supply (PSU):
    Corsair CX600M
    Case:
    NZXT H440
    Monitor(s):
    Dell U2412m + LG IPS something something
    Operating System(s):
    W8.1 pro
    Internet Connection:
    40mbs~
    I saw Linus's review on it and it seems it still has some room for improvement,though I forgot what they were xD
     
  14. funkydunk

    funkydunk Member

    Joined:
    Feb 14, 2015
    Messages:
    51
    Likes Received:
    3
    Location:
    UK
    Good job.. you got some skills
     
  15. n0b0dyspecial

    n0b0dyspecial Active Member

    Joined:
    Feb 6, 2015
    Messages:
    42
    Likes Received:
    4
    Location:
    Unites states
    Show PC Specs
    CPU:
    FX 8320
    Motherboard:
    Gigabyte 990FXA-UD3
    Memory (RAM):
    Ballistix Sport 8gb 1600mhz
    Storage:
    intel 535 240GB ssd
    Graphics Card(s):
    XFX r9 290x core edition
    Power Supply (PSU):
    Corsair TX 750m
    Case:
    Raidmax Vortex V4
    Monitor(s):
    Dell 21in 1680x1050 5ms
    Operating System(s):
    Windows 10 Pro
    Internet Connection:
    Crappy low speeds
    That is great looking nice job davido_labido got me to say aww and that's hard so good job
     
  16. funkydunk

    funkydunk Member

    Joined:
    Feb 14, 2015
    Messages:
    51
    Likes Received:
    3
    Location:
    UK
    How's it going?
     
  17. davido_labido

    davido_labido Active Member

    Joined:
    Jul 17, 2014
    Messages:
    60
    Likes Received:
    13
    Thanks all :D


    Well, as mentioned, the EKWB stuff has arrived!!! wooohoooo!

    so once again a massive thanks to:

    [​IMG]

    This is mostly just product porn, but hey, I personally think i took some nice pics for once so im going to share them :p

    So, what they sent me:

    [​IMG]

    Out of the box!

    [​IMG]

    120mm LC solution Coolstream PE radiator

    [​IMG]

    The 240mm LC Solution Coolstream PE rad

    [​IMG]

    and them both together having a spooning session!

    [​IMG]

    The CPU block is so shiny i could actually get it to reflect the EK logo from the box :eek:

    [​IMG]

    Luckily i actually had a load of fittings so I didn't need any more from EK. They doo look like they are ganging up on this Supremacy EVO block though :/

    [​IMG]

    The DDC pump Rez combo:

    [​IMG]

    I added this EK DDC heatsink to the pump/rez combo.

    [​IMG]

    I also sleeved the cables <3

    [​IMG]

    I also did a test fit of the GPU block

    [​IMG]

    hmmmmm, tasty.

    [​IMG]

    So, urm... can anyone see the problem?

    [​IMG]

    So, as you can see, most of the products are black.. this will be changing soon! Also, I guess I will have to get creative with the GPU placement haha :D luckily id already bought a riser cable as I did have my suspicions the GPU wouldnt fit ;)
     
    Last edited: Mar 7, 2015
  18. funkydunk

    funkydunk Member

    Joined:
    Feb 14, 2015
    Messages:
    51
    Likes Received:
    3
    Location:
    UK
    Good to see you back at it. Gpu too large, two radiators, reservoir, fairly small form factor case? Is this going to be tight or do you know voodoo?
     
  19. n0b0dyspecial

    n0b0dyspecial Active Member

    Joined:
    Feb 6, 2015
    Messages:
    42
    Likes Received:
    4
    Location:
    Unites states
    Show PC Specs
    CPU:
    FX 8320
    Motherboard:
    Gigabyte 990FXA-UD3
    Memory (RAM):
    Ballistix Sport 8gb 1600mhz
    Storage:
    intel 535 240GB ssd
    Graphics Card(s):
    XFX r9 290x core edition
    Power Supply (PSU):
    Corsair TX 750m
    Case:
    Raidmax Vortex V4
    Monitor(s):
    Dell 21in 1680x1050 5ms
    Operating System(s):
    Windows 10 Pro
    Internet Connection:
    Crappy low speeds
    So much beautiful ek porn
     
  20. davido_labido

    davido_labido Active Member

    Joined:
    Jul 17, 2014
    Messages:
    60
    Likes Received:
    13
    Oh, its going to be tighter than a ducks arse, but that's the fun!!!

    Thanks :D I guess its time to give the EK gear a lick of paint!!

    So, another day, another bit of modding!

    I took apart the CPU block and the rez, and chucked them into my spray box of awesomeness.

    [​IMG]

    Gave them a good coat of primer and white paint.

    [​IMG]

    Once this had dried I started to add some purple!

    [​IMG]

    hmmmm, white and purple!!

    [​IMG]

    The rez, im not 100% happy with the paint job on this, but for now, it will have to do whilst i sort out the loop. If i get time, I will be redoing it!

    [​IMG]

    Both together

    [​IMG]

    I got the dremel out and cut the slot so that the motherboard tray could sit flush!

    [​IMG]

    GPU placement hopefully!

    [​IMG]

    and where it will roughly sit, don't worry, the mounting will look far better when i do it properly lol.

    [​IMG]

    Confused (Garry) from the OcUK forums was helping me today, he bought his pillar drill around, as i don't have a workshop or garage, we were kitching modding as per usual. LOTS of dust and metal flying around today!

    [​IMG]

    Although it looks like we have done very little, we really have made a lot of progress today. Garry has gone away with a little task... re soldering a PCI-E riser... 164 pins and counting!!! This is so we can give the card the angle I want. If we cant, then I will have to change the angle slightly so that we can ensure that the riser doesn't get blocked by the PSU.

    It's starting to come together now!!
     

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)